Changing The Colour Mode - Sharp MX-2300N Guide Scanner Manual

CHANGING THE COLOUR MODE

This procedure is used to change the colour mode used to scan the original when the [COLOUR START] key (
or the [BLACK & WHITE START] key (
Start key
[COLOUR START]
key
[BLACK & WHITE
START] key
USB Mem. Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
File Name
1
Auto
Original
(1)
USB Mem. Scan
Colour Mode
Colour Mode
B/W Mode
(1)
2
• System Settings (Administrator): Default Colour Mode Settings
The default colour mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the colour mode.
) is pressed.
Mode
Auto
Full Colour
Mono2
Greyscale
Mono2/Auto
Auto
Colour Mode
TIFF/JPEG
File Format
Special Modes
A4
Special Modes
(2)
Colour B/W
Auto Mono2
Full Colour
Greyscale
Mono2
Greyscale
(2)
The machine detects whether the original is colour or black and white and
automatically selects full colour or black and white (Mono 2 or Greyscale)
scanning.
The original is scanned in full colour. This mode is best for full colour
originals such as catalogues.
Colours in the original are scanned as black or white. This mode is best for
text-only originals.
The colours in the original are scanned in black and white as shades of
grey (greyscale).
Display the colour mode screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Colour Mode] key.
Select the colour mode.
OK
(1) Touch the key of the mode to be used when
the [COLOUR START] key (
pressed.
You can select whether black & white scanning will take
place in Mono 2 or greyscale when [Auto] is selected and
(3)
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
greyscale.
(2) Touch the key of the mode to be used when
the [BLACK & WHITE START] key (
pressed.
(3) Touch the [OK] key.
58
Scanning method
)
) is
) is