Scanning An Original - Sharp MX-M1056 Quick Start Manual

SCANNING AN ORIGINAL

The basic operation for scanning is explained below.
The procedure for sending a scanned file by E-mail to a destination stored in the address book is explained here.
1
2
3
4
Original
Address E-mail Address
8½x11
Address Book
CA
Preview
5
Address
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE
FFF FFF
Frequent Category
Use All
Detail
Global Scan to USB/
History
Address Search Local Drive
B/W
Auto Set
Start
Sort
Scan to USB/
Local Drive
B/W
Start
Press the [E-Mail] key and tap the key
that shows
Mode select screen appears.
Tap the [Easy Scan] mode icon.
Easy Scan mode screen appears.
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► PLACING ORIGINALS (page 16)
Tap the [Address Book] key.
Color
Start
Tap the key of the desired destination.
CA
Addresses of the current mode are selected from addresses
whose checkboxes were selected when the tapped
destination was registered. If no addresses were registered
with the checkbox selected, tap the [Yes] key in the
confirmation screen and select the desired addresses.
To add another destination, tap the key of the destination.
Color
Start
SCANNER
.
45