Specifying The Original Scan Size And Send Size (Enlarge/Reduce) - Sharp MX-2300N Guide Scanner Manual

SPECIFYING THE ORIGINAL SCAN SIZE
AND SEND SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. For example, if the
scan size is A4 (8-1/2" x 11") and the send size is B5 (5-1/2" x 8-1/2"), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
• If the original is a non-standard size, you must set the scan size manually.
Ready to send.
Scan Scan
Mode Switch
A4
Image
Settings
Send Settings
"Scan Size"
"Send Size" is
set to B5
(5-1/2" x 8-1/2")
A4 (8-1/2" x 11")
Resend
Send
Address Book
Auto
Address Entry
Special Modes
Quick File
Transmission
The image is reduced to
B5 (5-1/2" x 8-1/2")
before transmission
35
File