Canon imageCLASS 2220 Copying Manual page 77

1
3
4
1-66 Collating Copies (Finisher)
When you want hole punches made, press [Hole Punch].
G If you select [Rotate]:
❑
Press [Next] © select [Auto], [LTR], [LTRR], [STMT], or [STMTR] paper.
IMPORTANT
[Rotate] can only be selected in the following cases:
- When the available paper size is selected manually
- When the available paper size is loaded in both the horizontal and vertical
directions
- The selected paper source must have Drawer Eligibility for APS/ADS set to 'On'.
(See Chapter 3, "Customizing Settings," in the Reference Guide.)
Press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
IMPORTANT
If you select [Auto] after selecting Rotate, make sure you select a paper size that
can be rotated. If you do not, the paper might not be rotated and collated. A4, A4R,
A5 and A5R papers can be rotated.
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
scanning is complete, press [Done].
Copying starts.
NOTE
To cancel this setting, press [Finisher] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
(Start) once for each original. When