Canon imageCLASS 2220 Copying Manual page 69

3
1
1-58 Changing the Copy Ratio (Copy Ratio)
Specify the desired copy ratios.
G To manually specify the copy ratios (XY Zoom):
❑
Use the numeric keys or press [–] or [+] on the touch panel display to enter
values.
❑
Press [X] (horizontal axis) © enter a value.
❑
Press [Y] (vertical axis) © enter a value.
❑
Press [OK].
Place the original on the platen glass if the zoom ratio is more than 400%.
You can also enter values using
your entries.
If you enter the ratio using
values by pressing [–] or [+].
If you enter a value outside the setting range, a message prompting you to enter
the appropriate value appears on the screen.
The display returns to the Copy Basic Features screen, and the specified copy
ratios are displayed.
NOTE
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
G To have the copy ratios automatically specified (Auto XY Zoom):
❑
Press [Auto XY Zoom] © [OK].
The display returns to the Copy Basic Features screen, and the copy ratios
generated by the machine are displayed.
- (numeric keys), and
0 9
- (numeric keys), you can change the entered
0 9
(clear) to enter
C