Setting The Job Duration Display - Canon imageCLASS 2220 Copying Manual

Setting the Job Duration Display

If Job Duration Display is set to 'On', the time remaining to complete the copy job
(Job Duration Time) is displayed in minutes on the touch panel display. (The job
duration time is not displayed for some copy modes.)
NOTE
•
The job duration time is displayed as <Print Time> on the screen displayed during
3
printing.
•
The job duration time is not displayed for the Remote or Cascade Copy, Transparency
Interleaving, Cover/Sheet Insertion, Different Size Originals, Rotate Collating, Rotate
Grouping modes, or when the copy waiting time is less than one minute.
•
The default setting is 'Off'.
1
3-10

Setting the Job Duration Display

(Additional Functions) © [Copy Settings] © [Job
Press
Duration Display].