Canon imageCLASS 2220 Copying Manual page 127

2
2-16 Making Copies for Use as a Booklet (Booklet)
G If you want to add a cover:
❑
Press [Add Cover] © [Next].
❑
Select whether to print on the cover pages.
❑
Select the paper type for the cover page © press [Next].
If the Saddle Finisher-G1 (optional) is not attached, press [OK] © proceed to
step 5.
Load the paper for the cover page face down in the stack bypass.
IMPORTANT
•
The paper used for the cover page must be the same size as that used for the main
document.
•
The paper used for the main document or the cover page must be from 17 lb to 20
lb bond (64 g/m to 80 g/m
2
•
The cover page can only be copied on the front.
•
When you select [Add Cover], you cannot specify the stack bypass as the paper
source used for the main document.
).
2