1
1-14
Flow of Copy Operations
NOTE
•
If there is a current job, the machine scans the original, and waits to print it. Printing
starts when the current job is complete.
•
When the copy has been made, remove it from the output tray.
•
If the Card Reader-C1 (optional) is attached, remove the control card. (See
Chapter 7, "Optional Equipment," in the Reference Guide.)
•
If you have set up Department ID Management, press
"Before You Start Using This Machine," in the Reference Guide.)
G If the following screen is displayed:
❑
Follow the instructions on the touch panel display © press
each original. When scanning is complete, press [Done].
(ID). (See Chapter 1,
ID
(Start) once for