1
Reducing/Enlarging Using the Original and Copy Paper
Sizes (Zoom Program)
You can change the copy ratio by specifying the original size and the copy paper
size in inches. The available copy ratios are from 25% to 800% when the original is
placed on the platen glass, and from 25% to 400% when the original is placed in
the feeder. The following two Zoom Program modes are available.
I Making Copies with the Same XY Copy Ratio (Zoom):
Specify the same copy ratio for both the vertical (Y) and horizontal (X) axes.
I Making Copies with Different XY Copy Ratios (XY Zoom):
Specify different copy ratios for the vertical (Y) and horizontal (X) axes.
1-48
Changing the Copy Ratio (Copy Ratio)
3
Press
(Start).
Copying starts.
NOTE
To cancel this setting, press [Copy Ratio] © [Entire Image].
•
•
To cancel all settings and return the machine to the Standard mode,
press
(Reset).
•
Also, the Center Shift mode is automatically set when you set the Entire Image
mode.
NOTE
The specified sizes are converted into a copy ratio (%) by the machine using the formula
below.
Copy ratio (%) = (copy size / original size) x 100
Original
X = 4" (100 mm)
LTR
Copy
X = 5 7/8" (150 mm)
LTR