Setting the Image Orientation Priority
If [Image Orientation Priority] is set to 'On', the machine always copies an image in
the same orientation as the original image. This is because the images on originals
may be copied upside down, depending on the copy mode set.
IMPORTANT
This setting is not available when the Finisher-J1 is attached.
3
NOTE
•
If Image Orientation Priority is set to 'On', the copy speed is slower than normal.
•
The default setting is 'Off'.
1
3-8
Setting the Image Orientation Priority
(Additional Functions) © [Copy Settings] © [Image
Press
Orientation Priority].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.