Canon imageCLASS 2220 Copying Manual page 149

3
2
4
2-38 Erasing Shadows and Frame Lines from Copies (Frame Erase)
Press [–] or [+] to set the frame erase width © press [OK] ©
[Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
If you want to enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
C
•
If you enter the value using
value by pressing [–] or [+].
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '3/4" (18 mm)' for the binding erase width. The maximum
binding erase width is '13/16" (20 mm)'.
Press (Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] © [Frame Erase] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
- (numeric keys), you can change the entered
9
0
- (numeric keys) and
9
0