Static Mode - Draytek VIGOR 3300 User Manual
Vigor 3300 series broadband voip/security/load balance router
Hide thumbs
Also See for VIGOR 3300:
- Quick start manual (33 pages) ,
- Troubleshooting manual (12 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
2
.
2
.
2
S
t
a
t
i
c
M
2
.
2
.
2
S
t
a
t
i
c
M
You can manually assign a static IP address to the WAN interface and complete the
configuration by applying the settings and rebooting your router. Choosing Static as the IP
mode, you will see the following page:
All the settings here are set by privately. Your ISP will not provide these settings.
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
IP Alias List
After setting up the WAN interface, the user can click Next to setup the LAN interface
continuously.
Vigor3300 Series User's Guide
o
d
e
o
d
e
Assign a private IP address to the WAN interface.
Assign a subnet mask value to the WAN interface.
Assign a private IP address to the gateway.
Assign a private IP address to the primary DNS.
Assign a private IP address to the secondary DNS.
Assign other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g., Advanced >>
NAT>>Port Redirection/DMZ Host). Thirty-two IP addresses
settings are allowed at one time.
15
Hide quick links:
Advertisement
Table of Contents
