Using A Static Ip With A Dsl/Cable Modem - Draytek Vigor2100 Series User Manual

Residential broadband router
Hide thumbs Also See for Vigor2100 Series:
Table of Contents

Advertisement

being idle for a preset amount of time. The default is 180 seconds. If
you set the time to 0, the PPP session will not terminate itself.
IP Address Assignment Method (IPCP)
Fixed IP: Check No (Dynamic IP) unless your ISP has provided you
with a static IP address.
Fixed IP Address: If your ISP has provided you with a static IP
address enter it here.

3.2.2 Using a Static IP with a DSL/Cable Modem

You can receive a fixed public IP address or a public subnet (i.e.
Multiple public IP addresses) from your DSL or Cable ISP. Because of
NAT (Network Address Translation) function, you just need to assign a
fixed public IP address to assign to the WAN interface of your router.
Your router will let your every PC share the broadband access as NAT
transform the said fixed IP address to several private IP address. Click
Internet Access Setup > Static or Dynamic IP to enter the setup page,
which is depicted as follows:
Internet Access Setup
3-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor2100gVigor2100vVigor2100vg

Table of Contents