Syslog - Draytek VIGOR 3300 User Manual

3 . 1 . 3 S y s l o g
3 . 1 . 3 S y s l o g
The Vigor3300 Series supports a Syslog function to keep a record of abnormal conditions. The
router will send Syslog packets to a Syslog server on the remote site. The administrator can
observe any abnormal events from Vigor3300. In the System group, click the Syslog option.
The Syslog web page is shown below:
Status
Syslog Server IP
Syslog Server Port
Apply
Vigor3300 Series User's Guide
Click Enable to activate this function. The router will send system
log message for your reference. If you click Disable, the router will
not send out any message about system log.
The IP address of the Syslog server. If a user assigns an IP address
of "0.0.0.0", the Syslog function will be disabled. Then, Vigor3300
will not send Syslog packets to the Syslog server.
Assign a port for the Syslog protocol.
Click Apply to save these settings.
27