Dhcp Mode - Draytek VIGOR 3300 User Manual

2 . 2 . 3 D H C P M
2 . 2 . 3 D H C P M
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
Vigor3300 automatically. It is not necessary for you to assign any setting. (Host Name and
Domain Name are required for some ISPs). S imply click Next to setup LAN interface.
After setting up the WAN interface, the user can click Next to setup the LAN interface
continuously.
IP Address
Subnet Mask
Status
Start IP
Vigor3300 Series User's Guide
o d e
o d e
Assign an IP address for the LAN interface.
Assign the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
17