Radius Setup - Draytek VIGOR 3300 User Manual

Use IP Alias
IP Alias
Apply
C o m m
C o m m
This page lists common ports used in Internet. The information includes service/application,
protocol for that service and port number of that service.
3 . 3 . 3 R A D I U S
3 . 3 . 3 R A D I U S
A RADIUS (Remote Authentication Dial-In User Service) is a security authentication
client/server protocol widely used by Internet service providers on other remote access service.
A RADIUS is the most common means of authenticating and authorizing dial-up and tunneled
network users. The built-in RADIUS client function allows you to extend the remote dial-in
user accounts to the RADIUS server. Your user accounts will not be limited by built-in
accounts (in VPN>>PPTP>>User Profile). It also lets you centralize remote access
authentication for network management.
Radius is a server for remote user authentication and accounting. Its primary use is for Internet
Service Providers, though it may as well be used on any network that needs a centralized
authentication and/or accounting service. A Radius supports a wide variety of authentication
schemes. A user supplies his authentication data to the server either directly by answering the
terminal server's login/password prompts, or using PAP of CHAP protocols.
The Vigor 3300 Series support Radius client function. A user can configure some
authentication information to do an authentication with Radius server. In Vigor3300 Series, it
is only applied by VPN->PPTP function.
In the Advanced group, click the Radius option. You will get the following page.
60
o n P o r t s L i s t
o n P o r t s L i s t
S e t u p
S e t u p
Disable option uses WAN interface, Enable option uses IP
Alias addresses.
Select an IP address which are set within the list of IP Alias
configured in Network >>WAN interface.
Click Apply to reboot the system and apply the settings.
Vigor3300 Series User's Guide