Table of Contents
Advertisement
Press the
Change_Directory.
The phone number listed in directory location 1 appears. Select Nxt to display other directory
locations.
Entering Telephone Numbers and Dial Command Modifiers into Directory Locations
The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
To add a telephone number to a directory location, make the following selections:
Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the
first character position.)
Select F2 ( " ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric
character.
Press the
Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 10-1 for a list of valid dial command modifiers.)
3910-A2-GN32-40
key until Change_Directory appears. Press any function key to select
01:551234z
"
#
Nxt
F1
F2
F3
02:z
"
#
Nxt
F3
F1
F2
02:z
"
#
Nxt
F1
F2
F3
key to move the cursor to the next character position.
01:9W5556789z
"
#
Nxt
F1
F2
F3
September 1998
Call Setup Branch
10-7
Advertisement
Table of Contents
