Table of Contents
Advertisement
Overview
The Test branch of the Top-Level menu allows you to initiate various modem tests. Use these
tests if you are having data communication problems, such as periodic character loss, random
errors, or constant format errors. By the process of elimination, you can usually isolate the fault
in your system.
There are six selections under Test: Abort, Self (Self-Test), Loc Analog Loop (Local Analog
Loopback), Rem Digital Loop (Remote Digital Loopback), Loc Digital Loop (Local Digital
Loopback), and Pattern. The only tests that can operate concurrently on a single modem are
Pattern with a Local Analog Loopback and Pattern with a Remote Digital Loopback. If any test
is operating, besides the two combinations just mentioned, it must be canceled before starting
another test.
The Test branch only initiates and cancels tests. If any parameters need to be set, refer to Test in
Chapter 5, DCP Configuration.
Status
Configure
3910-A2-GN32-40
PList
Control
Abort
Self
Loc_Analog_Loop
September 1998
Test Branch
"Status"
Call_Setup
SubHS
Test
Rem_Digital_Loop
Loc_Digital_Loop
8
Tlk/Data
Security
Remote
Pattern
8-1
Advertisement
Table of Contents
