Honeywell DCP301 User Manual page 77

Chapter 6. OPERATION
Display 4
Display 5
Display 6
6-4
Program No. Segment No.
Pattern
tendency
Output states of events 1 to 3, time events 1 to 5
This display is exclusive to heat/cool output models (output catalog No. appended with
3D or 5K).
Program No. Segment No.
Pattern
tendency
Output states of events 1 to 3, time events 1 to 5
Either of "h:min" or "min:s" is selected as the time unit in setup settings. Select either
"remaining segment time" or "total operating time" in setup settings as the details whose
time is to be displayed.
Program No. Segment No.
Pattern
tendency
Output states of events 1 to 3, time events 1 to 5
When the remaining number of cycles is "0", subsequent cycle operation is not carried
out.
Heat-side output (%)
OUT
Cool-side output (%)
PV
PV
TM
Time
PV
PV
CYC
Number of remaining cycles