Honeywell DCP301 User Manual page 106

No. Item Code
T T
13 Time event type
Item Factory User
Setting Setting
0
Chapter 7. PARAMETER SETUP
Setting
0: T1 to T5 are all time events.
1: T1 is a segment No. event.
T2 to T5 are time events.
2: T1 and T2 are segment No. events.
T3 to T5 are time events.
3: T1 to T3 are segment No. events.
T4 and T5 are time events.
4: T1 to T4 are segment No. events.
T5 is a time event.
5: All T1 to T5 are segment No. events.
[Note]
On models not supporting time events, "– – – –" is
displayed and setting is not possible.
Settings can be changed only in the READY mode.
7-21