Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual page 109

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-2 Network Configuration Area Items (continued)
Item
TFTP Server 1
TFTP Server 2
Default Router 1–5
DNS Server 1–5
Operational VLAN ID
Admin. VLAN ID
Unified CM 1–5 -
Information URL
Directories URL
Messages URL
Services URL
DHCP Enabled
DHCP Address Released
Alternate TFTP
Forwarding Delay
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Description
Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
Backup Trivial File Transfer Protocol (TFTP) server used by the phone.
Default router used by the phone (Default Router 1) and optional backup routers (Default
Router 2–5).
Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS
servers (DNS Server 2–5) used by the phone.
Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in
which the phone is a member.
Auxiliary VLAN in which the phone is a member.
Host names or IP addresses, in prioritized order, of the Cisco Unified Communications
Manager servers with which the phone can register. An item can also show the IP address
of an SRST router that is capable of providing limited Cisco Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the Cisco Unified Communications Manager
server IP address and one of the following states:
Active—Cisco Unified Communications Manager server from which the phone is
•
currently receiving call-processing services.
Standby—Cisco Unified Communications Manager server to which the phone
•
switches if the current server becomes unavailable.
Blank—No current connection to this Cisco Unified Communications Manager server.
•
An item may also include the Survivable Remote Site Telephony (SRST) designation,
which identifies an SRST router capable of providing Cisco Unified Communications
Manager functionality with a limited feature set. This router assumes control of call
processing if all other Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications Manager always appears last in
the list of servers, even if it is active. You configure the SRST router address in the Device
Pool section in Cisco Unified Communications Manager Configuration window.
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
URL of the server from which the phone obtains message services.
URL of the server from which the phone obtains Cisco Unified IP Phone services.
Indicates whether DHCP is being used by the phone.
Indicates the setting of the DHCP Address Released option on the phone's Network
Configuration menu.
Indicates whether the phone is using an alternative TFTP server.
Indicates whether the internal switch begins forwarding packets between the PC port and
switched port on your phone when your phone becomes active. When forwarding delay is
set to disabled, the internal switch begins forwarding packets immediately. When
forwarding delay is set to enabled, the internal switch waits eight seconds before
forwarding packets between the PC port and the SW port. You should set forwarding delay
to enabled when you connect both ports to switches for redundant uplinks or when you
daisy-chain phones together.
Network Setup
8-5