Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual page 101

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3
Item
Rx Unicast
Neighbor Device ID
Restart Cause—One of the
following values:
Hardware Reset (Power-on reset)
Software Reset (memory controller
also reset)
Software Reset (memory controller
not reset)
Watchdog Reset
Unknown
Port 1
Port 2
IPv4
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Network Statistics Message Information for the Cisco Unified IP Phone 6900 Series
Description
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP
protocol.
Cause of the last reset of the phone
Link state and connection of the PC port (for example,
100 Mb Full-Duplex
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
Link state and connection of the Network port
Information on the DHCP status. This includes the following
states:
CDP BOUND
CDP INIT
DHCP BOUND
DHCP DISABLED
DHCP INIT
DHCP INVALID
DHCP REBINDING
DHCP REBOOT
DHCP RENEWING
DHCP REQUESTING
DHCP RESYNC
DHCP UNRECOGNIZED
DHCP WAITING COLDBOOT TIMEOUT
SET DHCP COLDBOOT
SET DHCP DISABLED
DISABLED DUPLICATE IP
SET DHCP FAST
means that the PC port is in a link-up
Status Menu
Auto
7-7