Stereo Bi-Amp W/ Dual Delays - dbx DriveRack 260 User Manual

DriveRack
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack.
2. Connect the outputs of the DriveRack and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see Section 6.2) and the 260.
Software
1. Select a program (Factory: 1x4 w/ 2 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module
buttons.
4. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and
program its output level boost and cut parameters.
2
MA-5002VZ
®
Left
Right
3 4
JBL AE Series
AM6315/95
JBL AE Series
ASB6128
Application Guide
7.4 Stereo Bi-amp w/ Dual Delay
5
JBL AE Series
AC2212/95
Zone B
DriveRack® User Manual
Section 7
dbx ZC-2
JBL Control 25
Zone A
dbx ZC-1
63