Section 7
7.1 Mono 4-Way w/ Two Aux Zones
2
JBL AE Series
AC2215/64
JBL AE Series
ASB 6128
60
DriveRack® User Manual
Application Guide
This Application guide section is provided to offer suggested installation applications of the
DriveRack 260 that will allow you to optimize peak performance of the processor. Note that
the six included applications represent the extensive flexibility of the DriveRack units. These
applications can be used verbatim, or as sample reference guide templates for designing
countless audio applications.
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack.
2. Connect the outputs of the DriveRack and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see Section 6.2) and the 260.
Software
1. Select a program (Factory: 2x4 w/ 2 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module
buttons.
4. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and
program its output level boost and cut parameters.
Left
3
Right
4
dbx ZC-1
JBL Control 26C
Ceiling Speaker
Zone A
Lobby
DriveRack
5
dbx ZC-2
JBL Control 26C
Ceiling Speaker
Zone B
Cry Room
®