Navigating The Wizard Section; Navigating The I/O Section - dbx DriveRack 260 User Manual

Section 2

Navigating the WIZARD Section

2.9 Navigating the Wizard Section
Navigating the WIZARD Section
From program mode, press the RTA/WIZARD button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
From program mode, press the RTA/WIZARD button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
RTA/WIZARD
The NEXT and PREV
buttons scroll through
the pages of selected module.
RTA/WIZARD
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Successive presses of the Data wheel will select
effect parameters within the currently selected page.

2.10 Navigating the I/O Section

Navigating the I/O Section
From program mode, press the I/O button. Pressing the Data Wheel will select the effect parameter to be edited.
Navigating the I/O Section
<PREV PG NEXT PG>
From program mode, press the I/O button. Pressing the Data Wheel will select the effect parameter to be edited.
The NEXT and PREV
<PREV PG NEXT PG>
buttons scroll through
the pages of selected module.
The NEXT and PREV
buttons scroll through
the pages of selected module.
Navigating the Other Section
From program mode, press the Other button. Successive presses of the Other button will move you to each of the various insert modules available.
18 DriveRack® User Manual
Navigating the Other Section
<PREV PG NEXT PG>
From program mode, press the Other button. Successive presses of the Other button will move you to each of the various insert modules available.
Editing Functions
SYSTEM SETUP
GEQ Setup-Dual Mono
Insert 1 Setup-
or Stereo Linked
Select
SYSTEM SETUP
Amp Select-
GEQ Setup-Dual Mono
Amp Sensitivity- Insert 1 Setup-
High, Mid, Low
or Stereo Linked
High, Mid, Low Select
See list
AUTO EQ WIZARD
Amp Select-
Amp Sensitivity-
Connect Mic Pink Noise Level
High, Mid, Low
High, Mid, Low
-Inf to 20dB
See list
AUTO EQ WIZARD
AFS WIZARD
Connect Mic Pink Noise Level
Mixer gain turn Select Number of
-Inf to 20dB
down prompt Fixed Filters
- 0-12
AFS WIZARD
Mixer gain turn Select Number of
down prompt Fixed Filters
- 0-12
FEEDBACK
Input Level 1 -Inf to 20dB
Input Level 2 -Inf to 20dB
Master Level -Inf to 20dB
FEEDBACK
Successive presses of the Data wheel will select
Input Level 1 -Inf to 20dB
effect parameters within the currently selected page.
Input Level 2 -Inf to 20dB
Master Level -Inf to 20dB
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Pressing the Data Wheel will select the effect parameter to be edited.
OTHER
Subharmonic Synthesizer
Subharmonic - -On/Off
Main Speaker Select-
Insert 2 Setup-
See list
Select
Main Speaker Select-
Amp Level Insert 2 Setup- Low Amp
High, Mid, Low Bridged/
Select See list
Normal-
Amp Level Low Amp Load New
Auto EQ - L Auto EQ - R
High, Mid, Low Bridged/ Program-
Normal-
Auto EQ - L Auto EQ - R
Select Type - Mixer Gain Adjust-
Low, Med, High mode
Select Type - Mixer Gain Adjust-
Low, Med, High mode
Pink Noise On/Off
Pink Noise Level -10 to 10dB
Pink Noise On/Off
Pink Noise Level -10 to 10dB
24-36Hz Level - 24-36Hz
DriveRack
Sub Speaker Select-
See list
WIZARD
Sub Speaker Select-
Load New
Program- See list
Auto EQ - L-R
Left and Right when using
Linked Graphic EQ
Auto EQ - L-R
Left and Right when using
Fixed Filter Setup
Linked Graphic EQ
Done-
Fixed Filter Setup
Done-
I/O Section
Output Channel 1-6 On/Off
Polarity +/-
Phase -180 to 0
I/O Section
Output Channel 1-6 On/Off
Polarity +/-
Phase -180 to 0
OTHER
®
WIZARD