Editing A Stamp - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 99 Thursday, July 8, 2004 11:59 AM
Design Center
• Stamps are only sewn within the region
that they have been applied to.
• The size of stamps may change when they
are imported into Layout & Editing if the
size of the design has been changed with
the Magnification setting in the Import
size dialog box.

Editing a stamp

1.
Click on the Tool Box.
→ The shape of the pointer changes to
, the Stamp Attribute Setting dia-
log box appears, and stamps that have
been applied are indicated by pink dotted
lines.
b
Memo:
If a region was already selected, "marching
lines" appear around the region, and its
stamps are indicated by dotted lines.
2.
Click the region with the stamp that you want
to edit.
→ "Marching lines" appear around the se-
lected region.
3.
Click the stamp that you want to edit.
→ Round handles appear around the stamp,
and a rotation handle appears at the top of
the stamp.
4.
To change the stamp pattern, select a
different pattern in the Stamp Attribute
Setting dialog box, and then click Apply.
To change the stamp size and orientation,
specify the desired settings in the Stamp
Attribute Setting dialog, or adjust it by
dragging the handles or rotation handle.
To move a stamp, drag it to another location
within the region or partially positioned on the
region.
To delete the stamp, select the menu
command Edit – Delete, or press the
c
Rotation handle
Handles
Stage 4 (Sew Setting Stage)
a
Note:
Only one stamp can be selected at a time. If
you select another stamp, the previously
selected stamp becomes deselected.
Delete
key.
b
Memo:
• Stamps appear only after a stamp tool is
selected.
• Stamps are only sewn within the region
that they have been applied to.
• To close the dialog box, click Close.
"Editing Outlines" on page 78
99