Changing The Size And Position Of The Image; Saving The Image Data - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 114 Thursday, July 8, 2004 11:59 AM
Layout & Editing
Changing the Size and Position of the
Image
The size and position of the image can be adjusted.
1.
Click Image, then Modify.
→ A red line and handles appear around the
image.
b
Memo:
The status bar shows the dimensions (width
and height) of the image.
Moving an image:
1.
Move the pointer over the image.
→ The shape of the pointer changes to
2.
Drag the image to the desired location.

Saving the Image Data

The image can be saved as a file or outputted to the Clipboard.
■
Saving as a file
1.
Click Image, then Output, then to File.
→ A dialog box similar to the one shown be-
low appears.
2.
Select the drive, the folder and the format in
which you want to save the image data.
3.
Type in the file name.
114
Inputting Images and Embroidery Patterns
Scaling an image:
1.
Move the pointer over one of the handles.
→ The shape of the pointer changes to
,
on the handle that the pointer is over.
b
Memo:
• is for scaling the width.
• is for scaling the height.
• and
dimensions at the same time.
2.
Drag the handle to adjust the image to the
desired size.
Deleting an image:
1.
Delete
Press the
Delete.
.
→ The image will be deleted from the Design
Page.
b
Memo:
• The correct extension is automatically
selected.
• The image data can be saved in either of
the following formats: Windows bitmap
(.bmp), Exif (.jpg).
4.
Click Save to save the data.
b
Memo:
To quit the operation, click Cancel.
■
Outputting to the Clipboard
1.
Click Image, then Output, then to Clipboard.
→ The image data in the Design Page is
copied onto the Clipboard.
, or , depending
are for scaling both
key, or click Edit, then