Deleting Outlines - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 80 Thursday, July 8, 2004 11:59 AM
Design Center
3.
Move the pointer over one of the four rotation
handles.
→ When the pointer is moved over a rotation
handle, the shape of the pointer changes
to .
4.
Drag the rotation handle clockwise or
counterclockwise to rotate the outline in 1°
increments.
b
Memo:
To rotate the outline in 15° increments, hold
down the Shift
rotation handle.
■
Rotating numerically
1.
Select the outline that you want to rotate.
2.
Click Edit, then Numerical Setting, then
Rotate.
→ The Rotate dialog box appears.
3.
Type or select the desired rotation angle.
b
Memo:
• The angle can also be specified by moving
the pointer over the red arrow inside of the
circle, then dragging the red arrow to the
desired angle. When the pointer is moved
over the red arrow, its shape changes to
.
• Select 0 degree to leave the outline
unchanged.
80
key while dragging the
Stage 3 (Figure Handle Stage)
4.
Click OK.
b
Memo:
• To preview the outline at the new angle in
the Design Page, click Preview.
• To close the dialog box without applying
the changes to the settings, click Cancel.
a
Note:
The range of values that can be entered is
between 0 and 359 degrees, in 1-degree
increments.

Deleting outlines

1.
Select the outline to be deleted.
2.
Delete
Press the key, or click Edit, then
Delete.