Stage 4 (Sew Setting Stage) - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 235 Thursday, July 8, 2004 11:59 AM
Tool Box
Sets the pointer in point edit mode.
Pointer shape:
Sets the pointer in line drawing mode.
Pointer shape:
Sets the pointer in zoom-in mode.
Pointer shape:
Maximizes the selected Design Page to fit in the window.
Sets the pointer in zoom-out mode.
Pointer shape:
Fills the display with the selected objects.

Stage 4 (Sew Setting stage)

In stage 4 (Sew Setting stage), outline data from stage 3 (Figure Handle stage) are assigned line and region
sewing attributes. This is done by using the Tool Box and the Sewing Attributes bar.
Selecting a button on the Tool Box changes the pointer mode and shape. A description of each tool appears
at the left side of the status bar.
Tool Box
Sets the pointer in region sewing mode.
When you start up the application, this tool is selected.
Pointer shape:
Sets the pointer in line (all) sewing mode.
Pointer shape:
Sets the pointer in line (part) sewing mode.
Pointer shape:
Sets the pointer in hole sewing mode.
Pointer shape:
Sets the pointer in zoom-in mode.
Pointer shape:
Maximizes the selected Design Page to fit in the window.
Design Center
Purpose
Purpose
See page
p. 81
p. 82
p. 102
p. 32
p. 102
See page
p. 84
p. 85
p. 86
p. 97
p. 102
p. 32
235