Step13 Transferring The Pattern To An Original Card - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 52 Thursday, July 8, 2004 11:59 AM
3.
Click Display on the menu bar, and then click
Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
Realistic Preview
→ A realistic preview of the embroidery pat-
tern appears.
b
Memo:
To zoom in (or out), click
Box, click
desired area of the embroidery pattern.
a
Note:
The embroidery pattern cannot be edited
while the realistic preview is displayed.
4.
To return to the previous display, repeat step
3.
, or press the
52
Creating and Editing Embroidery Patterns
on the Tool
(or ), and then click the
Esc
key.
Step 13
Transferring the pattern to an
original card
Before you can actually sew the embroidery
pattern, you must transfer the pattern to a sewing
machine. Transfer the embroidery pattern to the
sewing machine using media of the type used by
your machine, for example, original cards, floppy
disks, CompactFlash cards, or USB media. For
this example, we will transfer the pattern to an
original card.
1.
Insert an original card into the USB card writer
module.
a
Note:
The original card is inserted correctly when
you hear it snap into place.
2.
Click File on the menu bar, point to Write to
Card, and then click Current Design on the
submenu.
An alternate method is to click the Toolbar
button indicated below.
→ The following message appears.
a
Note:
If the original card is not brand new, make
sure that the patterns already stored on the
card are no longer needed.
3.
Click OK.
→ The following message appears.
Write to Card