Getting Started; Introduction; About This Chapter; Layout & Editing - Brother PEDESIGN 5.0 Instruction Manual

Introduction

This package contains three applications.

About this Chapter

The next three sections of this chapter are organized as a tutorial to provide you with a hands-on intro-
duction to the different features of the applications.
First, using the Auto Punch function in Layout & Editing, you will create an embroidery pattern automati-
cally from an image. The embroidery pattern can also be created in Design Center using the 4-stage pro-
cedure described later.
Next, the pattern will be imported into Layout & Editing. You will learn how to add a few components to
the embroidery image and to organize the layout.
In the third section, you will then learn how to use Programmable Stitch Creator to edit a programmable
stitch in order to create your own.
I
Layout & Editing
Layout & Editing is used to automatically create embroidery patterns from images, combine images and
text, and create embroidery data that can be written to an Original card. The images may come from
scanning a printed image or can be created with an application like Paint
files must be
bmp, tif, jpg, j2k, pcx, wmf, png, eps, pcd, or fpx
data can be incorporated into the embroidery pattern.

Getting Started

1.
The Auto Punch
function of Layout &
Editing can be used to
create an embroidery
pattern automatically.
→
page 11
2.
Layout & Editing
will be used to combine
images and text and
organize the layout.
→
page 29
3.
Programmable Stitch
Creator will be used.
→
page 50
1.
Design Center can be
used create an
embroidery pattern.
or
→
page 16

. The extension of the image
. In addition, the following type of embroidery
9