Section 4 - Configuration
The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting such external
alarm devices as IR-Sensors and alarm relays to the network camera.
DI and DO:
Setting for both Digital input signal and digital output
signal can be configured here.
Digital input trigger
Please select from High or Low for digital input trigger
condition:
condition. When external device connect to the digital
input pins, the state of the voltage will be monitored.
(Max. Input 500mA, 1Vdc)
Digital output:
Select Grounded or Open to define normal status of
the digital output. The camera will show whether the
trigger is activated or not.
D-Link DCS-3415 User Manual
Advanced
DI and DO
61