D-Link DCS-3430 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Security Camera
  5. DCS-3430
  6. User manual
D-Link DCS-3430 User Manual

D-Link DCS-3430 User Manual

802.11n, poe day & night network camera
Hide thumbs Also See for DCS-3430:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-3430

Summary of Contents for D-Link DCS-3430

  • Page 2: Table Of Contents

    DI/DO ................59 Motion Detection Setup Wizard ........30 Networking Basics ............61 Network Setup ..............33 Check your IP address ...............61 Wireless Setup (DCS-3430 only) ........35 Statically Assign an IP address ..........62 Dynamic DNS ...............36 Image Setup .................37 Technical Specifications ..........63 Audio and Video ..............38 Contacting Technical Support ........66...

  • Page 3: Product Overview

    Section 1 - Product Overview Product Overview Package Contents • D-Link DCS-3411/3430 Day & Night Network Camera • CAT5 Ethernet Cable • Power Adapter • Manual and Software on CD • Quick Install Guide • Camera Stand • Two Antennas (DCS-3430 only) Note: Using a power supply with a different voltage than the one included with the package will cause damage and void the warranty for this product.

  • Page 4: Introduction

    Nothing herein represents a warranty or representation that the D-Link product provided herein is suitable for the end-user’s intended use under the applicable laws of his or her state. D-Link disclaims any liability whatsoever for any end-user use of the D-Link product, which fails to comply with applicable state, local, or federal laws.

  • Page 5: Features

    The Network Camera can also be used for intruder detection with its motion-detection mode, capture still images and video images for archiving and many more applications. D-Link DCS-3411/3430 User Manual...

  • Page 6: Hardware Overview

    Use to connect external speakers to provide 2-way communication Ethernet Jack RJ-45 connector for Ethernet which can also be used to power the camera using Power over Ethernet (DCS-3411 only) Antenna Connector Connect wireless antennas (DCS-3430 only). D-Link DCS-3411/3430 User Manual...

  • Page 7: Hardware Installation

    Section 1 - Product Overview Hardware Installation Attach the Antennas (DCS-3430 only) Locate the antennas included with your DCS-3430, and attach them to the antenna connectors located on the back of the DCS 3430. Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the Network Camera’s back panel and attach it to the network.
  • Page 8 Attach the camera stand to the Network Camera and station it for your application. There are holes located in the base of the camera stand allowing the Network Camera to be mounted to the ceiling, or any wall securely. Socket for camera stand D-Link DCS-3411/3430 User Manual...

  • Page 9: Software Installation

    Section 2 - Installation Software Installation Turn on the computer and Insert the D-Link DCS-3411/3430 Driver CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are similar for the other Windows operating systems.
  • Page 10 Section 2 - Installation Click Next to continue. Click Yes to accept the License Agreement. D-Link DCS-3411/3430 User Manual...
  • Page 11 Section 2 - Installation To start the installation click Next. Note: The installation may take several minutes to complete. D-Link DCS-3411/3430 User Manual...
  • Page 12 Section 2 - Installation Click Finish to complete the installation. D-Link DCS-3411/3430 User Manual...
  • Page 13 Section 2 - Installation Now, click on ffdshow from the autorun screen. This will install the proper codecs that will allow you to playback video taken by the DCS-3411/3430. Click ffdshow Click I Agree to continue. D-Link DCS-3411/3430 User Manual...
  • Page 14 Section 2 - Installation Select your language and click OK. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 15 Section 2 - Installation Select the location you want to install to and click Next to continue. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 16 Section 2 - Installation Click Next to continue. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 17 Section 2 - Installation Click Next to continue. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 18 Section 2 - Installation Click Next to continue. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 19 Section 2 - Installation Once ffdshow is finished installing, click Finish. D-Link DCS-3411/3430 User Manual...

  • Page 20: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link Network Camera using the Setup Wizard. Setup Wizard Configuration Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
  • Page 21 Click the Wizard button to continue. Note: A DHCP server is a device that supplies the IP address. Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank. D-Link DCS-3411/3430 User Manual...
  • Page 22 Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next to continue. Select static IP to use the same IP address at each boot up. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 23 Click the button labeled Link to access the web configuration page. The Setup Wizard will automatically open your web browser to the IP address of the DCS-3411/3430, in this example it is: http://192.198.0.185. Your DCS-3411/3430 may have a different IP Address. D-Link DCS-3411/3430 User Manual...

  • Page 24: Web-Based Configuration Utility

    Section 3 - Configuration Web-based Configuration Utility This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration Utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address for your Network Camera (http://192.168.1.179)

  • Page 25: Live Video

    Video Profile 1 Video Profile 2 Video Profile 3 Video Profile 4 Full screen mode Taking a Snapshot Recording a Video Clip Set a Storage Folder Listen/Stop Listening Talk/Stop Talking Start/Stop Digital Output D-Link DCS-3411/3430 User Manual...

  • Page 26: Setup

    Manual Motion Detection Setup and skip to page 40. Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 27 Select Static IP if your Internet Service Provider has provided you with connection settings, or you wish to set a static address within your home network. Enter the accurate information for your static IP setting. Click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 28 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 29 If you have selected Static IP, you will see a summary of your camera’s settings. Please note down all this information as you will need it for accessing your camera within the network. Click Apply to save your settings. D-Link DCS-3411/3430 User Manual...

  • Page 30: Motion Detection Setup Wizard

    Section 3 - Configuration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera motion detection functions. Click Next to continue. This section will allow you to enable or disable motion detection as well as control the sensitivity or your camera’s...
  • Page 31 This step allows you to specify how you will receive the events notification of your camera, either via using email or FTP. You will need to enter all the relevant information for your email account or FTP settings. Then, click Next to continue. D-Link DCS-3411/3430 User Manual...
  • Page 32 Section 3 - Configuration You have completed the Motion Detection Wizard. Click Apply to activate your settings. D-Link DCS-3411/3430 User Manual...

  • Page 33: Network Setup

    Primary domain name server that translates names to IP Primary DNS: addresses. Secondary DNS: Secondary domain name server to backup the primary one. Enable UPnP: Enable this setting to allow your camera to be configured as an UPnP device in your network. D-Link DCS-3411/3430 User Manual...
  • Page 34 The password to your account. You may obtain this information from your ISP. HTTP Port: The default value is 80. RTSP port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. D-Link DCS-3411/3430 User Manual...

  • Page 35: Wireless Setup (Dcs-3430 Only)

    Section 3 - Configuration Wireless Setup (DCS-3430 only) This sections allows you to setup and configure the wireless settings for your camera. Enable Wireless: Select to enable wireless configuration. Site Survey: Select the wireless connection you would like to use from the pull-down menu.

  • Page 36: Dynamic Dns

    Enter your user name or e-mail used to connect to the DDNS Password: Enter your password used to connect to the DDNS server. Timeout: This sets the number of hours between DDNS updates. Status: Indicate the connection status, automatically determined by the system. D-Link DCS-3411/3430 User Manual...

  • Page 37: Image Setup

    If the number is lower, a blurrier image will be displayed. Mirror: Select this feature to obtain a mirror image. Frequency: You may chose 50Hz or 60Hz frequency. It may depend on the country where you reside. D-Link DCS-3411/3430 User Manual...

  • Page 38: Audio And Video

    RTSP URL: Is the URL name used to connect to the camera when viewing from a mobile device or PDA. Analog Select the display system of Analog Video Output on the back Output: NTSC or PAL. D-Link DCS-3411/3430 User Manual...
  • Page 39 You can adjust the speaker volume by using the volume level setting. Volume: Enable Enable this feature to hear audio from the IP Camera’s microphone. Microphone: Microphone You can adjust the MIC Port volume by using the volume level setting. Volume: D-Link DCS-3411/3430 User Manual...

  • Page 40: Motion Detection

    Select this option to draw out the motion detection area: area by dragging your mouse in the window (indicated by the red-colored box). Erase motion Select this option to erase your motion detection area: area by dragging your mouse in the window. D-Link DCS-3411/3430 User Manual...

  • Page 41: Time And Date

    Set the date and This option allows you to set the time and date time manually: manually. Copy Your This will synchronize the time information from your Computer’s Time Settings: D-Link DCS-3411/3430 User Manual...

  • Page 42: Recording

    A preset amount of time before motion recording is triggered. Postrecord: A preset amount of time after motion recording is triggered. Continous: Select to continuously record. Scheduled: Select this option to manually schedule and configure the starting and ending time for the recording. D-Link DCS-3411/3430 User Manual...

  • Page 43: How To Save Video To A Shared Folder

    Section 3 - Configuration How to save video to a shared folder? 1. Set the folder in your computer to shared. You can set as anonymous authentication or set a user name and password. D-Link DCS-3411/3430 User Manual...
  • Page 44 1 to record to. If you selected Account, enter the user name and password from step 1. 4. Set the recording and schedule options. 5. Click Save Settings. The status will be set to Normal when connected properly. D-Link DCS-3411/3430 User Manual...

  • Page 45: Snapshot

    The prefix that will be added to the filename of each file. Port: The port of the FTP server. The default port is 25. Passive mode: Some FTP servers allow clients to use passive mode when connecting to an FTP, which uses random ports for transfers. D-Link DCS-3411/3430 User Manual...

  • Page 46: Sd Card

    If video files are stored on the SD card, click on the video folder Video: and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-3411/3430 User Manual...

  • Page 47: Advanced

    Selecting this mode will disable the IR Cut Filter. Night mode: Selecting this mode will enable the IR Cut Filter. Scheduled This mode will allow you to enter the desired time Mode: frames for the ICR filter. D-Link DCS-3411/3430 User Manual...
  • Page 48 For example, if the data is 011, for even parity, the parity bit is 0 to keep the number of logic-high bits even. If the parity is odd, the parity bit is 1, resulting in 3 logic-high bits. D-Link DCS-3411/3430 User Manual...

  • Page 49: Digital Output

    This enables the D/O to send a signal when there is signal: a triggered event. Trigger Event: You can choose from one or up to three events, such as Motion Detection, D/I Signal 1, and D/I Signal 2 for the sources of the triggered events. D-Link DCS-3411/3430 User Manual...

  • Page 50: Maintenance

    Select this option to enable the On-Screen Display feature for your camera. Label: The label name. Show time: Select this option to enable the time-stamp display in the video screen. LED Light: Chose On or Off. D-Link DCS-3411/3430 User Manual...

  • Page 51: System

    Load Configuration. Restore To Factory You may reset your camera and restore the factory Default: settings to your camera by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-3411/3430 User Manual...

  • Page 52: Firmware Upgrade

    Section 3 - Configuration Firmware Upgrade Your current firmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for the latest firmware version available. To upgrade the firmware on your DCS-3411/3430, please download and save the latest firmware version from the D-Link Support Page to your local hard drive.

  • Page 53: Status

    Section 3 - Configuration Status Device Info This page displays all the details information about your device and network connection. D-Link DCS-3411/3430 User Manual...

  • Page 54: Logs

    Section 3 - Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download or delete the log information by clicking Clear. D-Link DCS-3411/3430 User Manual...

  • Page 55: Help

    Section 3 - Configuration Help D-Link DCS-3411/3430 User Manual...

  • Page 56: Troubleshooting

    No, the DCS-3411/3430 Network Camera is used only on an wireless 802.11n, Ethernet or Fast Ethernet network. 8. Can the DCS-3411/3430 be connected to the network if it consists of only private IP addresses? Yes, the Network Camera can be connected to a LAN with private IP addresses. D-Link DCS-3411/3430 User Manual...
  • Page 57 13. Noisy images occur. How can I solve the problem? The video images might be noisy if the Network Camera is used in a very low light environment. To solve this issue you need more lighting. D-Link DCS-3411/3430 User Manual...
  • Page 58 The configuration on the Network Camera image display is incorrect. Through the Advanced > Image Setting section of the Web management you need to adjust the image related parameters such as brightness, contrast, hue and power line frequency for fluorescent light. D-Link DCS-3411/3430 User Manual...

  • Page 59: Di/Do

    Section 6 - DI/DO DI/DO ※DC12V total output current maximum to 200mA DC Power 12V IR illuminator Reed switch Photo Relay Vibration sensor Photo Relay ALARM Photo Relay RS-485 Transceivers RS485 Device D-Link DCS-3411/3430 User Manual...
  • Page 60 Connect to an alarm or buzzer. Refer to page 43. Connect to the RS-485 interface for controlling auxiliary equipment 485+/485- such as an external camera enclosure to perform PAN and TILT movement. Refer to page 48 for more information. D-Link DCS-3411/3430 User Manual...

  • Page 61: Networking Basics

    This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DCS-3411/3430 User Manual...

  • Page 62: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DCS-3411/3430 User Manual...

  • Page 63: Technical Specifications

    • 802.3x Flow Control support for Full-Duplex mode • Supported IEEE 802.3af standard (DCS-3411 only) Max Power Consumption • Max : DCS-3411 5.484 W, DCS-3430 6.9W • 42dB +/- 3dB, Omni-directional • Input: 100-240VAC, 50/60Hz, 0.4A • Output: 12VDC, 1.25A Antenna •...
  • Page 64 Appendix B - Technical Specifications Wireless (DCS-3430 only) • HTTP Server • Samba Client Frequency RangeAnd Channels • PPPoE • 2.412-2.4835 GHz • UPnP Port Forwarding • 13 Channels (depend on Area) • RTP • RTSP Transmition • RTCP • 2TX, 2RX •...
  • Page 65 Environmental conditions will adversely affect wireless signal range. Range varies depending on country’s regulation. The DCS-3411/3430 doesn’t include 5.25-5.35GHz & 5.47~5.725GHz. D-Link DCS-3411/3430 User Manual...

  • Page 66: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the Network Camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the Network Camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 67: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 68 D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
  • Page 69 D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.

  • Page 70: Limitation Of Liability

    FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
  • Page 71 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DCS-3411/3430 User Manual...
  • Page 72 Appendix D - Warranty For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Notice: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 73: Registration

    Appendix E - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.10 August 24, 2010 D-Link DCS-3411/3430 User Manual...

This manual is also suitable for:

Dcs-3411

Table of Contents