D-Link DCS-3411 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Security Camera
  5. DCS-3411
  6. User manual

D-Link DCS-3411 User Manual

Day & night network camera & wireless n day & night network camera
Hide thumbs Also See for DCS-3411:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-3411

Summary of Contents for D-Link DCS-3411

  • Page 2: Table Of Contents

    Dynamic DNS ............37 Technical Specifications ......... 64 Image Setup .............. 38 Audio and Video ............39 Motion Detection ............41 Time and Date ............42 Recording ..............43 How to save video to a shared folder? ...... 44 D-Link DCS-3411/3430 User Manual...

  • Page 3: Product Overview

    Section 1 - Product Overview Product Overview Package Contents • D-Link DCS-3411/3430 Day & Night Network Camera • CAT5 Ethernet Cable • Power Adapter • Manual and Software on CD • Quick Install Guide • Camera Stand • 2 Antennas (DCS-3430 only) Note: Using a power supply with a different voltage than the one included with the package will cause damage and void the warranty for this product.

  • Page 4: Introduction

    The D-Link DCS-3411/3430 Day & Night Network Camera is a powerful surveillance system that can connect to your network. The DCS-3411/3430 differs from a conventional PC Camera because it is a stand-alone system with a built-in CPU and Web server, providing low-cost solution capable of solving demanding security and home/office monitoring needs.

  • Page 5: Features

    • Low Light Recording and 16x Digital Zoom: The DCS-3411/3430’s 0.5 lux light sensitivity allows you to capture video in rooms with minimal lighting, making it ideal for use at night time. The camera also features 16x digital zoom for closer viewing.

  • Page 6: Hardware Overview

    Speakers (not included) may be connected to the camera to provide audio for 2-way communication. Microphone Connector The DCS-3411/3430 Day & Night Network Camera has an internal microphone built-in. However, you have the option of using an The BNC connector is used for professional video external microphone by plugging it into the connections.
  • Page 7 Section 1 - Product Overview Hardware Overview I/O Connector DC Power Connector The DCS-3411/3430 provides a terminal block with three The DC power input connector is located pairs of connectors situated on the back panel. Two pairs on the DCS-3411/3430 Network Camera’s are for input and the other is for output.

  • Page 8: Hardware Installation

    Network Camera. Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3411/3430 will turn red to indicate a proper connection. D-Link DCS-3411/3430 User Manual...
  • Page 9 Attach the camera stand to the Network Camera and station it for your application. There are holes located in the base of the camera stand allowing the Network Camera to be mounted to the ceiling, or any wall securely. Socket for camera stand D-Link DCS-3411/3430 User Manual...

  • Page 10: Software Installation

    Section 2 - Installation Software Installation Turn on the computer and Insert the D-Link DCS-3411/3430 Driver CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP. The steps and screens are similar for the other Windows operating systems.
  • Page 11 Section 2 - Installation Click Next to continue. Click Next Click Yes to accept the License Agreement. Click Yes D-Link DCS-3411/3430 User Manual...
  • Page 12 Section 2 - Installation To start the installation click Next. Note: The installation may take several minutes to complete. Click Next D-Link DCS-3411/3430 User Manual...
  • Page 13 Section 2 - Installation Click Finish to complete the installation. Click Finish D-Link DCS-3411/3430 User Manual...
  • Page 14 Section 2 - Installation Now, click on ffdshow from the autorun screen. This will install the proper codecs that will allow you to playback video taken by the DCS-3411/3430. Click ffdshow Click I Agree D-Link DCS-3411/3430 User Manual...
  • Page 15 Section 2 - Installation Select Language, and then click OK. Click OK Click Next D-Link DCS-3411/3430 User Manual...
  • Page 16 Section 2 - Installation Click Next Click Next D-Link DCS-3411/3430 User Manual...
  • Page 17 Section 2 - Installation Click Next Click Next D-Link DCS-3411/3430 User Manual...
  • Page 18 Section 2 - Installation Click Next Click Next D-Link DCS-3411/3430 User Manual...
  • Page 19 Section 2 - Installation Select the speaker from your PC, and then click Next. Click Next Click Install D-Link DCS-3411/3430 User Manual...
  • Page 20 Section 2 - Installation Installing Click Finish D-Link DCS-3411/3430 User Manual...

  • Page 21: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link Network Camera using the Setup Wizard. Setup Wizard Configuration Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.

  • Page 22: Setup Wizard Configuration

    3411/3430 and an IP Address (which may or may not be correct depending on what you have your DCS-3411/3430 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here. Click the Wizard button to continue.
  • Page 23 Section 3 - Configuration Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next Select static IP to use the same IP address at each boot up. Click Next D-Link DCS-3411/3430 User Manual...
  • Page 24 Click the button labeled Link to access the web configuration page. The Setup Wizard will automatically open your web browser to the IP address of the DCS-3411/3430, in this example it is: http://192.198.0.185. Your DCS-3411/3430 may have a different IP Address.

  • Page 25: Web-Based Configuration Utility

    Section 3 - Configuration Web-based Configuration Utility This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration Utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address for your Network Camera (http://192.168.1.179)

  • Page 26: Live Video

    Indicator: Video Profile 1 Video Profile 2 Video Profile 3 Video Profile 4 Full screen mode Taking a Snapshot Recording a Video Clip Set a Storage Folder Listen/Stop Listening Talk/Stop Talking Start/Stop Digital Output D-Link DCS-3411/3430 User Manual...

  • Page 27: Setup

    Manual Motion Detection Setup and skip to page 41. Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue.
  • Page 28 Select Static IP if your Internet Service Provider has provided you with connection settings, or you wish to set a static address within your home network. Enter the accurate information for your static IP setting. Click Next to continue. Click Next D-Link DCS-3411/3430 User Manual...
  • Page 29 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable and enter your host information. Click Next to continue. Click Next Enter a name for your camera and click Next to continue. Click Next D-Link DCS-3411/3430 User Manual...
  • Page 30 If you have selected Static IP, you will see a summary of your camera’s settings. Please note down all this information as you will need it for accessing your camera within the network. Click Apply to save your settings. Click Apply D-Link DCS-3411/3430 User Manual...

  • Page 31: Motion Detection Setup Wizard

    Section 3 - Configuration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera motion detection functions. Click Next to continue. Click Next This section will allow you to enable or disable motion detection as well as control the sensitivity or your camera’s ability to...
  • Page 32 This step allows you to specify how you will receive the events notification of your camera, either via using email or FTP. You will need to enter all the relevant information for your email account or FTP settings. Then, click Next to continue. Click Next D-Link DCS-3411/3430 User Manual...
  • Page 33 Section 3 - Configuration You have completed the Motion Detection Wizard. Click Apply to activate your settings. Click Apply D-Link DCS-3411/3430 User Manual...

  • Page 34: Network Setup

    Primary domain name server that translates names to IP Primary DNS: addresses. Secondary Secondary domain name server to backup the primary one. DNS: Enable UPnP: Enable this setting to allow your camera to be configured as an UPnP device in your network. D-Link DCS-3411/3430 User Manual...
  • Page 35 The password to your account. You may obtain this information from your ISP. HTTP Port: The default value is 80. RTSP port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. D-Link DCS-3411/3430 User Manual...

  • Page 36: Wireless Setup

    Key: If you use WEP, WPA-PSK, or WPA-PSK2 authentication, enter the Key (also known as password) used for your wireless network. Signal: Indicates the strength of the wirelss signal between the camera and the access point. D-Link DCS-3411/3430 User Manual...

  • Page 37: Dynamic Dns

    Enter your user name or e-mail used to connect to the DDNS Password: Enter your password used to connect to the DDNS server. Timeout: This sets the number of hours between DDNS updates. Status: Indicate the connection status, automatically determined by the system. D-Link DCS-3411/3430 User Manual...

  • Page 38: Image Setup

    If the number is lower, a blurrier image will be displayed. Select this feature to obtain a mirror image. Mirror: You may chose 50Hz or 60Hz frequency. It may depend Frequency: on the country where you reside. D-Link DCS-3411/3430 User Manual...

  • Page 39: Audio And Video

    RTSP URL: Is the URL name used to connect to the camera when viewing from a mobile device or PDA. Analog Output: Select the display system of Analog Video Output on the back NTSC or PAL. D-Link DCS-3411/3430 User Manual...
  • Page 40 You can adjust the speaker volume by using the volume level setting. Volume: Enable Enable this feature to hear audio from the IP Camera’s microphone. Microphone: Microphone You can adjust the MIC Port volume by using the volume level setting. Volume: D-Link DCS-3411/3430 User Manual...

  • Page 41: Motion Detection

    Select this option to draw out the motion detection area area: by dragging your mouse in the window (indicated by the red-colored box). Erase motion Select this option to erase your motion detection area area: by dragging your mouse in the window. D-Link DCS-3411/3430 User Manual...

  • Page 42: Time And Date

    Set the date This option allows you to set the time and date manually. and time manually: Copy Your This will synchronize the time information from your PC. Computer’s Time Settings: D-Link DCS-3411/3430 User Manual...

  • Page 43: Recording

    A preset amount of time before motion recording is triggered. A preset amount of time after motion recording is triggered. Postrecord: Continous: Select to continuously record. Scheduled: Select this option to manually schedule and configure the starting and ending time for the recording. D-Link DCS-3411/3430 User Manual...

  • Page 44: How To Save Video To A Shared Folder

    Section 3 - Configuration How to save video to a shared folder? 1. Set the folder in your computer to shared. You can set as anonymous authentication or set a user name and password. D-Link DCS-3411/3430 User Manual...

  • Page 45: D-Link Dcs-3411/3430 User Manual

    1 to record to. If you selected Account, enter the user name and password from step 1. 4. Set the recording and schedule options. 5. Click Save Settings. The status will be set to Normal when connected properly. D-Link DCS-3411/3430 User Manual...

  • Page 46: Snapshot

    The prefix that will be added to the filename of each file. Port: The port of the FTP server. The default port is 25. Passive mode: Some FTP servers allow clients to use passive mode when connecting to an FTP, which uses random ports for transfers. D-Link DCS-3411/3430 User Manual...

  • Page 47: Sd Card

    If video files are stored on the SD card, click on the video Video: folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-3411/3430 User Manual...

  • Page 48: Advanced Icr

    Selecting this mode will disable the IR Cut Filter. Night mode: Selecting this mode will enable the IR Cut Filter. Scheduled This mode will allow you to enter the desired time frames Mode: for the ICR filter. D-Link DCS-3411/3430 User Manual...

  • Page 49: Rs-485

    For example, if the data is 011, for even parity, the parity bit is 0 to keep the number of logic-high bits even. If the parity is odd, the parity bit is 1, resulting in 3 logic-high bits. D-Link DCS-3411/3430 User Manual...

  • Page 50: Digital Output

    This enables the D/O to send a signal when there is a signal: triggered event. Trigger Event: You can choose from one or up to three events, such as Motion Detection, D/I Signal 1, and D/I Signal 2 for the sources of the triggered events. D-Link DCS-3411/3430 User Manual...

  • Page 51: Maintenance

    Create a unique name for your camera, in which you can access the camera by using this name in your web- browser. For example: http://DCS-3411/3430 (By default). Enable OSD: Select this option to enable the On-Screen Display feature for your camera.

  • Page 52: System

    . Restore To Factory You may reset your camera and restore the factory Default: settings to your camera by clicking . Reboot Device: This will restart your camera. D-Link DCS-3411/3430 User Manual...

  • Page 53: Firmware Upgrade

    Section 3 - Configuration Firmware Upgrade Your current firmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for the latest firmware version available. To upgrade the firmware on your DCS-3411/3430, please download and save the latest firmware version from the D-Link Support Page to your local hard drive.

  • Page 54: Status

    Section 3 - Configuration Status Device Info This page displays all the details information about your device and network connection. D-Link DCS-3411/3430 User Manual...

  • Page 55: Logs

    Section 3 - Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download or delete the log information by clicking Clear. D-Link DCS-3411/3430 User Manual...

  • Page 56: Help

    Section 3 - Configuration Help D-Link DCS-3411/3430 User Manual...

  • Page 57: Troubleshooting

    7. Can the Network Camera be setup as a PC-cam on a computer? No, the DCS-3411/3430 Network Camera is used only on an wireless 802.11n, Ethernet or Fast Ethernet network. 8. Can the DCS-3411/3430 be connected to the network if it consists of only private IP addresses?
  • Page 58 10. Why am I unable to access the DCS-3411/3430 from a Web browser? If a router or firewall is used on the network, the correct ports for the DCS-3411/3430 may not be configured on the router or firewall. To correct the problem, you need to determine if the DCS-3411/3430 is behind a router or firewall and if the router or firewall is properly configured for the ports the DCS-3411/3430 is using.
  • Page 59 The configuration on the Network Camera image display is incorrect. Through the Advanced > Image Setting section of the Web management you need to adjust the image related parameters such as brightness, contrast, hue and power line frequency for fluorescent light. D-Link DCS-3411/3430 User Manual...

  • Page 60: Di/Do

    Section 5 - DI/DO DI/DO ※DC12V total output current maximum to 200mA DC Power 12V IR illuminator Reed switch Photo Relay Vibration sensor Photo Relay ALARM Photo Relay RS-485 Transceivers RS485 Device D-Link DCS-3411/3430 User Manual...
  • Page 61 Connect to an alarm or buzzer. Refer to page 47. Connect to the RS-485 interface for controlling auxiliary equipment such 485+/485- as an external camera enclosure to perform PAN and TILT movement. Refer to page 49 for more information. D-Link DCS-3411/3430 User Manual...

  • Page 62: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 63: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

  • Page 64: Technical Specifications

    177mm x 78mm x 60mm • IEEE 802.3u compliance • Support Full-Duplex operations • MDI/MDIX auto-negotiation Weight • 802.3x Flow Control support for Full-Duplex mode 577.8g • Supported IEEE 802.3af standard (DCS-3411 only) 42dB +/- 3dB, Omni-directional D-Link DCS-3411/3430 User Manual...
  • Page 65 Appendix B - Technical Specifications Max Power Consumption Networking • Max : DCS-3411 5.484 W, DCS-3430 6.9W • Input: 100-240VAC, 50/60Hz, 0.4A Protocol • Output: 12VDC, 1.25A • IPV4, ARP, TCP, UDP, ICMP • DHCP Client • NTP Client • DNS Client Wireless (DCS-3430 only) •...
  • Page 66 Windows 2000 / Windows XP / Windows Vista / 3GPP Mobile Phone Cable • Cable Length: 1800 ± 30mm Utility • UL 20AWGx2C (105°C) 300V Windows 2000 / Windows XP / Windows Vista Plug • Type: L type • Connector Color: Black D-Link DCS-3411/3430 User Manual...
  • Page 67 Environmental conditions will adversely affect wireless signal range. Range varies depending on country’s regulation. The DCS-3411/3430 doesn’t include 5.25-5.35GHz & 5.47~5.725GHz. D-Link DCS-3411/3430 User Manual...

This manual is also suitable for:

Dcs-3430

Table of Contents