Motion Detection - D-Link DCS-3415 User Manual

Section 4 - Configuration
Enabling Motion Detection will allow up to three windows that can be created with different settings for monitoring. This allows your
camera to serve as a security device that will record when motion is detected.
Enable motion Check this option to turn on the motion detection.
detection:
Window name: Create your own name for the monitored area/ window.
It will show at the top of the motion window.
Sensitivity: Set the measurable difference between two sequential
images that would indicate motion.
Percentage: Set the amount of motion in the window being monitored
that is required to initiate a motion detected alert. If this
is set to 100%, this means that motion is detected within
the whole window to trigger a snapshot.
Note: Setting a higher sensitivity and a lower
percentage will make any motion more easily.
New: Click to add a new window. A maximum of three motion
windows can be opened simultaneously. Use your
mouse to drag the window frame to re-size or the title
bar to move. Clicking on the 'x' at the upper right corner
of the window will close the window.
Save: Save the related settings of that window.
D-Link DCS-3415 User Manual

Motion Detection

49