D-Link DCS-3410 Quick Install Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Security Camera
  5. DCS-3410
  6. Quick install manual
D-Link DCS-3410 Quick Install Manual

D-Link DCS-3410 Quick Install Manual

Poe day & night network camera
Hide thumbs Also See for DCS-3410:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-3410

Summary of Contents for D-Link DCS-3410

  • Page 2: System Requirements

    CD-ROM with Manual and DCS-3410 Setup Wizard POE Day & Night Network Camera 1V 1.5A AC Power Adapter Camera Stand CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller. D-Link DCS-3410 Quick Install Guide...

  • Page 3: Hardware Overview

    As soon as the power adapter is connected to the camera, the LED will turn green. DC Power Connector The DC power input connector is located on the DCS-3410 Network Camera’s back panel and is labeled 1V DC with a single socket to supply power to the Network Camera.
  • Page 4 Hardware Overview Microphone Connector The DCS-3410 PoE Day & Night Network Camera has an internal microphone built-in. However, you have the option of using an external microphone by plugging it into the microphone connector. Iris Level Used only when the DC-Iris lens is connected to the camera.
  • Page 5 Hardware Overview I/O Connector The DCS-3410 provides a terminal block with three pairs of connectors situated on the back panel. Two pairs are for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices.
  • Page 6 The Camera supports additional DC-Iris lens, and provides the power and control signal required for adjusting the lens through this DC-Iris connector (4-pin). You can attach any standard DC-Iris lens (optional) for a specific purpose, such as outdoor applications. D-Link DCS-3410 Quick Install Guide...

  • Page 7: Hardware Installation

    Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3410 will turn green to indicate a proper connection and power to the unit. Attach the External Power Supply...

  • Page 8: Software Installation

    Software Installation Software Installation Insert the DCS-3410 CD into the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Windows Start > Run. ® In the Run command box type “D:\DCS3410.exe”, where D: represents the drive letter of your CD-ROM.
  • Page 9 Software Installation To start the installation, click Next. Note: The installation may take several minutes to complete. Click Next Click Finish to complete the instal- lation. Click Finish D-Link DCS-3410 Quick Install Guide...
  • Page 10 The Setup Wizard will appear and show the MAC address of the DCS-3410 and an IP Address (which may or may not be correct depending on what you have your DCS-3410 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here.
  • Page 11 Click Next Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next Select static IP to use the same IP address at each boot up. Click Next D-Link DCS-3410 Quick Install Guide...
  • Page 12 Click the button labeled Link to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the DCS-3410, in this example it is: http://1.1.0.10. Your DCS-3410 may have a different IP Address.
  • Page 13 This section shows your camera’s live video. You can select your video profile and other options; such as Snapshot, Recording, etc. For more information on using the web configuration, please refer to the user manual. D-Link DCS-3410 Quick Install Guide...
  • Page 14 D-ViewCam Installation D-ViewCam software is included for the administrator to manage up to 3 D-Link IP cameras remotely. The administrator can also record the video to hard drive and configure advanced settings. D-ViewCam is a complete manage- ment tool and includes all configurative settings.
  • Page 15 Click Browse if you would like to choose a specific folder for the installation, otherwise click Next to continue. Click Next Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next D-Link DCS-3410 Quick Install Guide...
  • Page 16 DViewCam Installation Click Finish to complete the installation. D-Link DCS-3410 Quick Install Guide...

  • Page 17: Add A Camera

    Use Admin as the default user name and leave the password blank. Click the ( C h e c k Box) to continue. The D-ViewCam screen will appear as shown below. Click (Next) begin the Add Camera wizard. D-Link DCS-3410 Quick Install Guide...
  • Page 18 My Map. Click Next to continue. If you choose Add Manually, you will need to enter the IP address of the camera. Click Next to continue. D-Link DCS-3410 Quick Install Guide...
  • Page 19 (06:00 PM to 0.00 AM), and ONLY record when motion is detected. Note: Except 24/7 Continuous Recording, the other schedule recording type can be activated ONLY when image motion detection window is created. Please refer to the users manual for more information. D-Link DCS-3410 Quick Install Guide...
  • Page 20 D-ViewCam Select Yes to add another camera, or select No to continue. Note: After you have finished adding your camera(s), click Close to view your camera(s). Your D-ViewCam Installation is Complete! D-Link DCS-3410 Quick Install Guide...
  • Page 21 Notes Notes D-Link DCS-3410 Quick Install Guide...
  • Page 22 Notes Notes D-Link DCS-3410 Quick Install Guide...
  • Page 23 Notes Notes D-Link DCS-3410 Quick Install Guide...

  • Page 24: Technical Support

    Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

Table of Contents