Installing and Removing AIMs
Check that the AIM is installed correctly on the system board. (See
Step 7
Figure 24
If you are finished installing modules, install the cover on the router. See the
Step 8
Cover" section on page
Apply the AIM label to the outside of the chassis as described in the
Step 9
on page
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
24
AIM Installed in AIM Slot 1
51.
26.
Figure
24.)
"Installing the Chassis
"Applying the AIM Label" section
OL-5792-04