Cisco 2811 - Voice Security Bundle Router Hardware Manual page 109

Table 3 System Error and Recovery Messages (continued)
LED Type LED Color
AUX/ Green
PWR
AUX/ Green
PWR
AUX/ Green
PWR
— —
OL-5789-01
Message, Meaning, and Recommended Action
Message:
%ENVMON-5-RPS_STATUS: RPS not available
Explanation:
Redundant power supply is connected to the router, but is not available to back up the internal
power supply.
Recommended action:
Message is informational only.
The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
Note
Message:
%ENVMON-5-RPS_STATUS: RPS in use
Explanation:
The router is receiving power from the redundant power supply.
Recommended action:
Message is informational only.
The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
Note
Message:
%ENVMON-5-RPS_STATUS: RPS ready/available
Explanation:
Redundant power supply is connected to the router and is powered up, but the router is not
receiving power from the redundant power supply.
Recommended action:
Message is informational only.
Note The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
Message:
%ENVMON-1-NO_PROCESS: Failed to create environmental monitor process
Explanation:
The router failed to establish the environmental monitor process. The amount of memory
available in the router may not be sufficient.
Recommended action:
Increase the amount of memory (RAM) in the router.
Troubleshooting Cisco 2800 Series Routers
System Messages
11