Figure 1
Removing the Cisco 2801 Chassis Screws
Step 3
Insert a flat-blade screwdriver between the chassis and chassis cover at the screwdriver pry points on the
bottom of the chassis, indicated in
cover from the chassis. It may be necessary to turn the unit upside down on a flat surface to access the
pry points.
Figure 2
Gently slide the chassis cover of the router away from the bottom of the chassis, as shown in
Step 4
OL-5792-04
Figure
Screwdriver Pry Points
1
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
2. Rotate the screwdriver 90 degrees to disengage the chassis
Removing the Chassis Cover
1
Figure
3
3.