HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 96

Settings, Telnet Config
HP Web Jetadmin password
Configured on the print server using HP Web Jetadmin
and an HP-proprietary
Information Base) object. For instructions, refer to your
online help for HP Web Jetadmin.
Examples of Access Control Settings
Settings
Embedded web
server ,
SNMP v1/v2c, or
Telnet enabled
Administrative
password not set
SNMP Set
Community
Name not
specified
Host access list
empty
Password(s) set:
IP administrative
password,
HP Web Jetadmin
password,
SNMP Set
Community
Name
No encryption
Host access list
empty
parameter
SNMP MIB (Management
Level of Access
Control
None.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet. No passwords
are required.
Best used for a trusted
environment.
Low.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet, but password(s)
protect against
unintentional
configuration changes.
Best used for a trusted
environment.
).