HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 101

Note: You may need your Windows System distribution files or
CD-ROMs to install TCP/IP components.
1. Check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support. Click
Control Panel
dialog box, check under the
and under the
If both are listed, the necessary software is already installed.
(Skip to "B. Configuring the networked
If not, continue to the next step.
2. To install the software, click the
TCP/IP Protocol
install the
service. Follow the instructions on the screen. When prompted,
type the full path to the Windows NT distribution files (you
may need your Windows NT workstation or server CD-ROM).
3. You may be automatically prompted for the TCP/IP
configuration values. If not, select the
Networks
window and select
[Properties]
If you are configuring a Windows server, type the
IP address, default gateway address, and subnet mask in
the appropriate spaces.
If you are configuring a client, check with your network
administrator to learn whether you should enable
automatic TCP/IP configuration or whether you should
type a static IP address, default gateway address, and
subnet mask in the appropriate spaces.
[OK]
4. Click to exit.
5. If prompted, exit Windows and restart your computer for the
changes to take effect.
B. Configuring the networked printer
Set up the default printer by performing the following steps.
Start
1. Click ,
2. Double-click
My Computer
3. Select
Network
. Double-click
Protocols
Services Microsoft TCP/IP Printing
tab for
and the
TCP/IP Protocol
.
Settings Printer
, . The
Add Printer
.
, then click
Start Settings
, ,
. In the resulting
TCP/IP Protocol
tab for
printer").
[Add]
button for each tab and
Microsoft TCP/IP Printing
Protocols
tab in the
. Then click
Printers
window opens.
[Next]
.
Network
.