HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 62

Sets TCP/IP factory defaults. After a cold reset, power cycle the print server. Parameters for
cold-reset
other subsystems, such as IPX/SPX or AppleTalk, are not affected.
Enables or disables the print server's
values:
ews-config
Specifies the maximum segment size (MSS) that the print server will advertise for use when
communicating with local subnets (Ethernet MSS=1460 bytes or more) or remote subnets
(MSS=536 bytes):
tcp-mss
MSS affects performance by helping to prevent IP fragmentation that may result in data
retransmission.
Specifies the maximum segment life (MSL) in seconds. The range is 5–120 seconds. The
tcp-msl
default is 15 seconds.
TCP/IP diagnostics parameters for Telnet
Telnet Parameter
(read-only parameter) The IP address of the system from which the print server's IP address
Last Config IP
was configured.
(read-only parameter) The number of client TCP connections that are refused by the print
TCP Conns
server.
Refused
(read-only parameter) The number of times that client systems were denied access to the print
TCP Access
server because there was no allowable entry in the print server's host access list.
Denied
(read-only parameter) The DHCP IP Address lease duration time in seconds.
DHCP Lease Time
(read-only parameter) The DHCP T1 timeout, specifying the DHCP lease renewal time in
DHCP Renew Time
seconds.
(read-only parameter) The DHCP T2 timeout, specifying the DHCP lease rebind time in
DHCP Rebind Time
seconds.
SNMP parameters for Telnet
0 Disables.
1 (default) Enables.
0 (default) All networks are assumed to be local (Ethernet MSS=1460 bytes or more).
1 Use MSS=1460 bytes (or more) for subnets, and MSS=536 bytes for remote networks.
2 All networks are assumed to be remote (MSS=536 bytes), except the local subnet.
embedded web server to view or change configuration
Description and Values