Ipx/Spx Protocol Information - HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

External print server/internet connector for usb
Hide thumbs Also See for Jetdirect 310x - Print Server For Fast Ethernet:
Table of Contents

Advertisement

Displayed during initialization while the print server attempts to obtain its
BOOTP/DHCP
TCP/IP configuration from a BOOTP or DHCP server. The temporary address
Server
displayed is 0.0.0.0.
The IP address of the system where the TFTP configuration file is located.
TFTP
During initialization, the temporary address 0.0.0.0 is displayed.
Server
The name of the print server's configuration file. The file pathname may be
Config
truncated to fit on rest of the one line allocated.
File
The Domain Name System (DNS) name of the domain in which the print
Domain
server resides (for example, support.company.com). It is not the fully
Name
qualified DNS name because the host printer name is not included (for
example: printer1.support.company.com).
The IP address of the Domain Name System (DNS) server.
DNS Server
The IP address of the Windows Internet Name Service (WINS) server.
WINS
Server
The IP address of the syslog server configured on the print server.
Syslog
Server
The timeout value expressed in seconds after which the print server closes an
Idle
idle TCP print data connection. Acceptable values are integers between 0 and
Timeout
3600 seconds. A value of zero turns off the timeout mechanism. The default
value is 270 seconds.
If the print server is found on the network by HP Web Jetadmin, the URL of
Web
the host system used for HP Web Jetadmin services is displayed. The URL is
Jetadmin
limited to two lines and may be truncated.
URL
Back to Top

IPX/SPX Protocol Information

Provides the current status and parameter values for the IPX/SPX network protocols.
Message
Not Specified the configuration server's IP address could not be
determined or was set to zero in the response packet.
Not Specified a TFTP server has not been not been set.
Not Specified a file was not specified in the BOOTP reply from
the host.
Not Specified a domain name has not been configured on the
print server.
Not Specified a DNS server's IP address has not been
configured on the print server.
Not Specified a WINS server's IP address has not been
configured on the print server.
Not Specified a syslog server has not been configured.
Not Specified the URL of the HP Web Jetadmin host system
could not be identified or is not configured.
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jetdirect 175xJetdirect 310x

Table of Contents