Verifying Phone Startup - Cisco Small Business SPA502G User Manual

Installing Your Phone

Verifying Phone Startup

Verifying Phone Startup

Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
• Connect the 2.5mm connector from the headset into the headset port on
the right side of the IP phone as shown in the following graphic:
After receiving power and network connectivity, the phone executes a boot-up
sequence. During this sequence, phones with screens display the Cisco logo and
then "Initializing Network." All of the lights on the phone will flash.
After your phone is successfully connected to the network and receives a basic
configuration, the extension number appears on the display screen (on models
with a display screen) and the phone has dial tone.
On models with screens, the phone displays the standard menu for the phone. The
date, name and number of the phone display on the top line of the LCD screen. At
the bottom of the LCD screen, softkeys are displayed over their associated soft
buttons.
2
26