Configuring The Cisco Spa 500S; Using The Cisco Spa 500S - Cisco Small Business SPA502G User Manual

Using the Cisco SPA 500S Attendant Console

Configuring the Cisco SPA 500S

Configuring the Cisco SPA 500S
NOTE

Using the Cisco SPA 500S

Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
The Cisco SPA 500S can be configured to easily access other phone lines in the
system. For example, buttons on the Cisco SPA 500S can be configured to monitor
and quickly dial another extension, speed dial a number, transfer calls to another
extension, and more.
The options available on the Cisco SPA 500S depend on the phone system
configuration. Your phone system might not provide all of the features mentioned in
this document.
Configuration of the Cisco SPA 500S and assignment of the line buttons is
performed by the system administrator and is not described in this document. To
configure the Cisco SPA 500S, you can use the web user interface for the IP phone
to which the Cisco SPA 500S is attached. See the Cisco SPA 500 Series and
Wireless IP Phone Administration Guide on Cisco.com. See
to Go From Here" for the link to this document.
The functions of Cisco SPA 500S buttons may differ depending on configuration.
However, in general, you can:
• Monitor an extension by viewing its color. The LED color of a line button
gives you information about the line being monitored; for example, a red
(steady) LED means that the monitored line is ringing.
• Transfer an active call by pressing the line button on the Cisco SPA 500S.
(This requires that the line button is configured as a speed dial for the
number to which you are transferring).
• Dial a configured extension by pressing the green line button on the Cisco
SPA 500S.
6
Appendix A, "Where
63