Honeywell 4800dr - Document Camera Barcode Manual page 52

Code 39
< Default All Code 39 Settings >
Code 39
* On
Off
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or
not transmit Start/Stop characters. Default = Don't Transmit.
Transmit
* Don't Transmit
Code 39 Check Character
No Check Character indicates that the document reader reads and transmits barcode data with or with-
out a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads Code 39 barcodes
printed with a check character, but will not transmit the check character with the scanned data.
When Check Character is set to Validate and Transmit, the document reader only reads Code 39 bar-
codes printed with a check character, and will transmit this character at the end of the scanned data.
Default = No Check Character.
* No Check Character
Validate, but Don't Transmit
Validate and Transmit
6 - 4