Supported Terminals; Programming The Interface - Plug And Play; Usb Connection; Ibm Surepos - Honeywell 4800dr - Document Camera Barcode Manual

4. Plug the power supply into the cable.
5. Once the document reader has been fully connected, power up the computer.
6. Program the document reader for a TTL-232 Serial Port interface using the Plug and Play barcode
on page 1-5.

Supported Terminals

Terminal
TTL-232
USB COM Port Emulation
USB PC Keyboard
USB Mac Keyboard
USB POS

Programming the Interface - Plug and Play

Plug and Play barcodes provide instant document reader set up for commonly used interfaces.

USB Connection

IBM SurePos

Scan one of the following "Plug and Play" codes to program the document reader for IBM SurePos (USB
Hand Held document reader) or IBM SurePos (USB Tabletop document reader).
Note: After scanning one of these codes, you must power cycle the cash register.
IBM SurePos
(USB Hand Held Document
Reader) Interface
Each barcode above also programs the following suffixes for each symbology:
Terminal ID
000
130 (default)
124
125
131
Symbology
EAN-8
EAN-13
UPC-A
UPC-E
Code 39
Interleaved 2 of 5
Code 128
Suffix
0C
16
0D
0A
00 0A 0B
00 0D 0B
00 18 0B
IBM SurePos
(USB Tabletop Document
Reader) Interface
1 - 3