Honeywell 4800dr - Document Camera Barcode Manual page 127

Reprogram the document reader with the correct Plug and Play or Terminal selection barcode. See
Chapter 1 and Chapter
• The document reader may not be programmed to output your barcode data properly.
For example, you scan "12345" and the host displays "A12345B."
Reprogram the document reader with the proper symbology selections. See
The document reader won't read your barcode at all.
1. Scan the sample barcodes in the back of this manual. If the document reader reads the sample bar-
codes, check that your barcode is readable.
Verify that your barcode symbology is enabled (see
2. If the document reader still can't read the sample barcodes, scan
If you aren't sure what programming options have been set in the document reader, or if you want the
factory default settings restored, scan
2.
Standard Product Default Settings
Chapter 6).
"All Symbologies"
on page 10-3.
Chapter 6.
on page 6-1.
12 - 3