Honeywell 4800dr - Document Camera Barcode Manual page 45

Move Commands
F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved ahead.)
F6 Move the cursor back "nn" characters from current cursor position.
Syntax = F6nn (nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved back.)
Move the cursor to the beginning of the data string. Syntax = F7.
F7
EA Move the cursor to the end of the data string. Syntax = EA
Search Commands
F8 Search ahead for "xx" character from current cursor position, leaving cursor pointing to "xx" char-
acter. Syntax = F8xx (xx stands for the hex value for an ASCII code, see
Chart (Code Page
F9 Search back for "xx" character from current cursor position, leaving cursor pointing to "xx" char-
acter. Syntax = F9xx (xx stands for the hex value for an ASCII code, see
Chart (Code Page
E6 Search ahead for the first non "xx" character from the current cursor position, leaving cursor
pointing to non "xx" character. Syntax = E6xx (xx stands for the hex value for an ASCII code,
see ASCII Conversion Chart (Code Page
E7 Search back for the first non "xx" character from the current cursor position, leaving cursor point-
ing to non "xx" character. Syntax = E7xx (xx stands for the hex value for an ASCII code, see
ASCII Conversion Chart (Code Page
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters, starting at the current cursor position,
as the cursor is advanced by other commands. When the FC command is encountered, the sup-
press function is terminated. The cursor is not moved by the FB command. Syntax = FBnnxxyy
. .zz where nn is a count of the number of suppressed characters in the list and xxyy .. zz is the
list of characters to be suppressed. (xx stands for the hex value for an ASCII code, see
Conversion Chart (Code Page
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
E4 Replaces up to 15 characters in the data string with user specified characters. Replacement
continues until the E5 command is encountered. Syntax = E4nnxx
nn is the total count of both characters to be replaced plus replacement characters; xx
characters to be replaced and xx
zz .
2
Terminates character replacement. Syntax = E5.
E5
FE Compare character in current cursor position to the character "xx." If characters are equal, incre-
ment cursor. If characters are not equal, no format match. Syntax = FExx (xx stands for the
hex value for an ASCII code, see
EC Check to make sure there is an ASCII number at the current cursor position. If character is not
numeric, format is aborted. Syntax = EC .
ED Check to make sure there is a non-numeric ASCII character at the current cursor position. If
character is numeric, format is aborted. Syntax = ED .
1252), page A-3.)
1252), page A-3.)
1252), page A-3.)
1252), page A-3.)
defines replacement characters, continuing through zz
2
ASCII Conversion Chart (Code Page
1252), page A-3.
ASCII Conversion
ASCII Conversion
ASCII
xx yy yy ...zz zz where
1 2 1 2 1 2
defines
1
1
1252), page A-3.)
and
5 - 3