Epson AcuLaser CX29NF User Manual page 223

Option
2-Sided Print
Sent Fax Fwd
Fwd. Settings Num
Prefix Dial
Prefix Dial Num
Discard Size
ECM
Extel Hook Thresh
Modem Speed
Region
Fax Activity
Epson AcuLaser CX29 Series
Description
You can set whether to make duplex print when you print faxes.
Select Off to print faxes on one side of a sheet of paper.
Select On to print faxes on both sides of a sheet of paper.
You can set your printer to forward incoming faxes to another fax
number. When a fax arrives at your printer, it is stored in the memory.
Then, the printer dials the fax number that you have specified and
sends the fax.
Select Off not to forward incoming faxes.
Select Forward to forward incoming faxes without printing. If an error
occurs during forwarding a received fax, the printer prints the fax.
Select Print & Forward to forward and print incoming faxes.
You enter the fax number of the destination to which incoming faxes
will be forwarded.
You can specify whether or not to set a prefix dial number.
You can set a prefix dial number of up to five digits. This number dials
before any auto dial number is started. It is useful for accessing the
Private Automatic Branch Exchange (PBX).
When receiving a document as long as or longer than the paper
installed in your printer, you can set the printer to discard any excess at
the bottom of the page. If the received page is outside the margin you
set, it will print on two sheets of paper at the actual size. When the
document is within the margin and Discard Size is set to Auto
Reduction, the printer reduces the document to fit it onto the
appropriate sized paper and discard does not occur. If Discard Size
is set to other than Auto Reduction, the data within the margin will be
discarded.
You can set whether to enable or disable the ECM (Error Correction
Mode).
You can select the external telephone hook detection threshold for the
condition in which a telephone line is not being used.
You can set the modem speed.
You can select the region where the printer is used.
You can change this setting when:
❏
No jobs in operation
❏
No fax jobs waiting in the memory
You can set whether to automatically print a fax activity report after
every 50 incoming and outgoing fax communications.
User's Guide
Faxing 223